John Deere 44-inch Front Blade for X300 Series Tractors - BM23044

Part Number: 6001M
1 Review(s)
John Deere 44-inch Front Blade for X300 Series Tractors - BM23044
John Deere 44-inch Front Blade for X300 Series Tractors SKU23044
Write a Review
Your Price: $625.00
John Deere 44-inch Front Blade for X300 Series Tractors - BM23044
Usually available
Brand John Deere


John Deere 44-inch Front Blade for X300 Series Tractors

The front blade is excellent for pushing light snow or loose material. It is 44-in. (112-cm) wide and can be angled 25 degrees right or left or used straight forward.

The 44-in. (112-cm) Front Blade is designed for use on Select Series X300 Tractors. It is conveniently raised and lowered with the tractor's equipment-lift system.

Easy-on, easy-off mounting system:
  • The blade can be installed or removed in minutes. No tools are needed to remove the blade, and no heavy lifting is required.
Full working range
  • The front blade can be operated from 1 in. (2.5 cm) below ground level to 5 in. (13 cm) above ground level.
  • A 3-in. (8-cm) floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.
  • The lift-linkage design makes raising the blade an easy job.
Adjustable skid shoes
  • Adjustable skid shoes on each side of the blade allow the operator to select the correct blading height for various conditions and jobs.
  • Skid shoes can be adjusted to any of seven different heights, supporting the blade at the selected level as it moves along the ground surface.
Heavy-duty blade construction
  • Constructed of heavy, 0.12-in. (3-mm) steel, the front blade has a reinforcing angle behind the front edge and a replaceable cutting edge.
  • The cutting edge takes most of the wear to greatly extend the useful life of the blade.
Requirements and/or recommendations:
  • Rear weights and tire chains are recommended for additional traction.
  • M146542 rubber squeegee is recommended for better cleaning action and protection of smooth surfaces.
  • LP33712 manual angling kit is recommended for the operator convenience of changing the blade angle from the tractor seat.
NOTE: A front lift kit needs to be installed on the tractor to raise and lower the blade. For the X300R, this front lift kit must be removed when changing from the front blade to the mower deck to provide clearance for the mower-deck drive.

This 44-in. (112-cm) Front Blade is compatible with Select Series X300 Tractors and the X300R Rear-Discharge Tractor.


  • California use info:

    ⚠ Warning: Cancer and Reproductive Harm -

You May Also Like

Customer Reviews

the plow worked great, i recommend this item. i used it successfully to plow a gravel driveway, walkway, and push about 8' of wet heavy snow on pavement without issues. I recommend chains if you have the turf tires. The directions are not fantastic and could really use a rewrite. i was able to get it done by supplementing the directions with some internet searches. I recommend this item. and i would purchase again. it works better than i expected. i have also used it to grade and back fill a gravel driveway.
Did you find this helpful?  34 of 35 Found Helpful
Reviewed by:  from NY. on 2/25/2021

Recently Viewed Items

0 Items