John Deere Mid Back Yellow Seat - AUC13381

Part Number: AUC13381
2 Review(s)
John Deere Mid Back Yellow Seat - AUC13381
John Deere Mid Back Yellow Seat - AUC13381
Write a Review
Your Price: $154.67
John Deere Mid Back Yellow Seat - AUC13381
Usually available
Brand John Deere


John Deere Low/Medium Back Seat Assembly

  • Also order 4 (four) 19H3552 5/16x1-1/2-inch mounting bolts
  • Bolt pattern 7-3/4-inches wide x 4-inches fore and aft
  • 12-inch backrest
Fits models:
  • 102
  • 105
  • 115
  • 125
  • 135
  • 145
  • L100
  • L110
  • L105
  • L107
  • L108
  • L111
  • L118
  • L120
  • L130
  • LA100
  • LA105
  • LA110
  • LA115
  • LA120
  • LA125
  • LA130
  • LA135
  • LA145
  • LA155
  • D100
  • D105
  • D110
  • E100
  • E110
  • G110
  • X110

Replaces AUC11475 GY20495 and GY21209


  • California use info:

    ⚠ Warning: Cancer and Reproductive Harm -

You May Also Like

John Deere 5/16 x 1-1/2 Bolt - 19H3552
Usually available

Customer Reviews

As to size, fit, and comfort this seat is an exact replacement for the original seat on the L110 repaired. With the recommended bolts, the operation is such to allow to and fro movement as an adjustable seat, which after the bolts are fully turned into the four points on the bottom of the seat there is space to allow such movement in the seat frame on the mower. One of the internal bolts was not secured into the seat itself, not allowing it to be fully tightened into the seat. The other three functioned perfectly as intended and seem to be sufficiently securing the seat, with the faulty one adequately guiding in its place. Therefore, while not a failed installation, it was not a perfect and infallible design.
Did you find this helpful?  4 of 4 Found Helpful
Reviewed by:  from Oxford, NC. on 7/24/2019
Perfect replacement
My new seat arrived sooner than expected. This was an extremely easy replacement for the original seat on my L111 mower. 5 minutes tops with the suggested longer bolts. The two holes for the seat adjustment lever were not pre-drilled but the original screws tapped themselves in with no issues. I backed one screw back out just to check and the threads were fine. The foam with this seat seems to be slightly more firm than the original but the firmness did not interfere with the operator presence switch in any way. The vinyl surface of the seat is a little more textured than the original which I like when mowing on steep hills.
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by:  from Nothing could be finer. on 7/22/2020

Recently Viewed Items

0 Items