John Deere 6.5-bushel Bagger Hopper and Chute for 100 Series with 48-inch Mower - BG20777

Part Number: BG20777
1 Review(s)
John Deere 6.5-bushel Bagger Hopper and Chute for 100 Series with 48-inch Mower - BG20777
John Deere 6.5-bushel Bagger Hopper and Chute for 100 Series with 48-inch Mower - BG20777
Write a Review
Your Price: $359.00
John Deere 6.5-bushel Bagger Hopper and Chute for 100 Series with 48-inch Mower - BG20777
Usually available
Brand John Deere

Description

John Deere 6.5-bushel Rear Bagger

Includes chute for 48-inch deck.
Front ballast is recommended when bagging, especially on hills or inclines

The hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:
  • Two durable bags with a generous, 6-1/2-bu (230-L) capacity lift out for emptying and are easy to reinstall.
  • Efficient lower chute provides smooth flow of material to reduce chance of plugging.
  • Standard mower blades can be used for bagging, high-lift blades are available for very difficult bagging conditions.
  • Air-exhaust duct directs air from the hopper back and toward the ground for clean operation.
  • Convenient bungee-cord fastener makes opening and closing the hopper easy.
  • It is easy to install and remove the hopper, and no tools are required after the initial installation.
  • Pins and spring clips hold the hopper and chute in place; there is nothing left to interfere with other attachments when removed.
  • Loose-knit bags allow more air to flow through to provide complete bag filling in wet and heavy grass conditions.
Replaces BM21889

Features

  • California use info:

    ⚠ Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

You May Also Like

John Deere Hopper Top Window -  M93074
(1)
$11.38
Usually available
John Deere Blind Rivet with Sleeve - GY00177
(4)
$2.02
Usually available

Customer Reviews

Mr.
Quality John Deere Product at a good price (got the fall discount). I mounted it to a legacy L120 John Deere tractor with a 48" deck. Required one hole to be drilled for the boot pin to fit. A template is included in the instructions for this. The high lift blades included are for newer models with the single star hole in the center. I asked for these blades to be switched out for high lift blades compatible with my L120. I still got sent the blades which do not fit my model. I sold them separately and bought the correct high lift blades for my L120. The bagger works very well. I have had no issues with the chute clogging unless I did not notice the bags got full. It is a smaller volume bagger and does require frequent emptying, especially with long grass and leaves. If you are looking for a high volume model, I would go with a towable system. I was looking for a non-towable option, so this is pretty much the only manufacturer option for 100 series 48" decks. Overall, quality product, works well with high lift blades, just requires frequent emptying.
Did you find this helpful?  16 of 20 Found Helpful
Reviewed by: (Verified Buyer)  from Connecticut. on 10/9/2017
5

Recently Viewed Items

TOP