John Deere SLEEVE L33357

Part Number: L33357
1 Review(s)
John Deere SLEEVE L33357
John Deere SLEEVE L33357
Write a Review
Your Price: $43.00
John Deere SLEEVE L33357
Usually available
Brand John Deere

Description

John Deere SLEEVE L33357

Features

  • California use info:

    ⚠ Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

You May Also Like

John Deere SNAP RING R72654
(0)
$0.82
Usually available
John Deere BOLT - R72741
(0)
$2.81
Usually available
John Deere PIN FASTENER R72871
(0)
$23.08
Usually available
John Deere CLAMP R73292
(0)
$12.13
Usually available

Customer Reviews

Pressure by-pass valve/"sleeve" 70's 80's Deere mid-size
I talked to many parts people and mechanic-types without learning the facts... (which I think I now somewhat know)... 1. Obviously, the by-pass valve has to be closed under all normal conditions; if you are seeing oil go "across" the hydraulic system in the first stage (which starves the second stage - in front of the engine - pump, the by-pass valve is a place to look). 2. The valves do get stuck open (little bits o' stuff in them - blown in during a filter clog, etc.) And the valve bodies do get stuck in the transmission casing. 3. There is no better way to try to get the valve body out than to grab the outer roll pin with quality needle-nose pliers. (After that it is a destructive process - break the valve body with a tapered object, haul out the bits with a magnet. Buy a new one.) 4. This sleeve IS A SUITABLE REPLACEMENT (even though John Deere sometimes does and sometimes doesn't have it on the parts list) FOR THE OLDER (more expensive) VALVE SLEEVE. 5 The shuttle spool is the same. Roll pins - to be right you will put in one that is 13/16 - rather than 3/4. 6. Springs to suit. This design adds a spring that pushes the whole valve sleeve in.
Did you find this helpful? 
Reviewed by:  from West Tisbury, MA. on 4/20/2013
5

Recently Viewed Items

TOP
0 Items
UA-604274-5