Baumalight 3 Point Hitch Stump Grinder - 1P24

Part Number: 1P24
0 Review(s)
Baumalight 3 Point Hitch Stump Grinder - 1P24
Baumalight 3 Point Hitch Stump Grinder - 1P24
Write a Review
Your Price: $2,999.00
Baumalight 3 Point Hitch Stump Grinder - 1P24
Usually available
Brand Baumalight


Baumalight 3 Point Hitch Stump Grinder 

The 1P24 PTO stump grinder is designed for small tractors equipped with hydrostatic drive and Category 1, 3-Point Hitch. This tractor mounted stump grinder model allows you to grind small and mid-sized stumps efficiently with a 24-inch Rotor, carrying 34 replaceable carbide teeth and has a cutting depth of 10-inches above ground and 6-inches below ground. With no hydraulics required this versatile PTO Stump Grinder is controlled with gravity feed which is ideal for tractors with no hydraulic remotes. All Baumalight stump grinders are made in North America and sold through dealers so you always will have local support to service or support your stump grinder.

Offered In GREEN, GRAY, or ORANGE. Please comment the color wanted, if no comment is received GRAY will be sent. 

Includes a bonus 6-pack of replacement teeth

  • 20 - 45 Recommended HP
  • 50 Maximum engine HP
  • 40 Maximum PTO HP
  • Quick hitch compatible
  • Slip clutch
  • Self-Regulating Feed
    • For smoother operation, the 1P24 3-point hitch stump grinder features a self-regulating feed function that uses the weight of the grinder head. If you suddenly advance your tractor while grinding, a hinge will automatically swing the grinding head out a bit, keeping even pressure on the stump.
  • Carbide Tipped
    • Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.
  • More Teeth
    • Many hands make light work, or in this case fine mulch faster and easier. The high number of teeth means that each tooth does less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of these rugged teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement.
  • Large Rotor
    • The massive 3/4-inch thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.
  • More Clearance
    • The Stump Blaster’s carbide teeth extend a full 1-1/4-inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.
  • Greasable Pins
    • Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

Recently Viewed Items

0 Items