1. Home
  2. John Deere Products
  3. John Deere Lawn Tractor Parts
  4. Model D100
  5. John Deere 44-in. Snow Blower for 100 Series and S240 Sport Tractors - 700CM

John Deere 44-in. Snow Blower for 100 Series and S240 Sport Tractors - 700CM

Part Number: 700CM
0 Review(s)
John Deere 44-in. Snow Blower for 100 Series and S240 Sport Tractors - 700CM
John Deere 44-in. Snow Blower for 100 Series and S240 Sport Tractors - 700CM
Write a Review
Your Price: $1,900.00
John Deere 44-in. Snow Blower for 100 Series and S240 Sport Tractors - 700CM
Usually available
Brand John Deere
Note: See parts catalog for usage

Description

John Deere 44-in. Snow Blower for 100 Series and S240 Sport Tractors

The 44-in. (112-cm) Snow Blower has the capacity to handle big snow removal jobs:

700BM Snow Blower is compatible with D100 Series Tractors built after April 2014, E100 Series, S100 Series, S220 Series, and S240 Tractors with a date of manufacture (DOM) after 02 March 2014 (DOM 020314), as shown on the tractor’s product identification number (PIN) label in the left-rear wheel well.
  • Works well in all snow conditions and is suited for snow removal around recreational parks, industrial parks, and other applications where snow must be moved greater distances
  • Ideal for home and estate owners in heavy snow regions
  • More effective than single-stage snow throwers when operating in wet, heavy snow and deep snow conditions; the low speed auger sizes crusted material as it moves snow toward the 2nd stage blower 
  • Provides consistent snow placement in variable snow conditions because the high-speed blower gives the discharged snow consistent velocity even in very light clean-up volumes
Two-stage auger and blower:
  • The low-speed auger picks up snow and moves it toward the center of the machine into the high-speed rotor where it is blown out of the discharge chute.
  • A cast-iron gearbox provides speed reduction for the auger and is protected by shear bolts for each auger half.
  • Two-stage snow blowers are more effective than single-stage snow throwers when operating in deep snow as the low-speed auger is used to size crusted material. They also provide consistent snow placement in variable snow conditions because the high-speed rotor gives the discharged snow consistent velocity-even in very light clean-up volumes.
Durable, second-stage blower fan:
  • The second-stage blower fan is formed from the same durable and rust-resistant, ultra-high molecular weight (UHMW) polyethylene material proven in the Power FlowTM blower fan for durability and long life.
  • The durable fan material has the same durable cold-weather characteristics as that used in snowmobile track rollers and will not bend and cause the fan to get out of balance.
Spout and deflector:
  • The discharge spout and deflector are made from high-density polyethylene material that will not dent or rust and resists snow buildup to ensure trouble-free operation. It is more durable, especially in cold-weather use, than the polypropylene material used by some other manufacturers.
  • Spout direction and deflector angle can both be conveniently controlled from the operator station:
  • The chute material remains smooth and is less likely to clog than a steel chute.
  • Controls to operate the chute are conveniently located for easy operation. 
  • The discharge spout can be rotated 200 degrees from the operator station.
  • The deflector can be easily adjusted from the operator's station to determine distance of throw.
Adjustable skid shoe:
  • Skid shoes help control the height of the snow blower cutting edge and are especially helpful for use on gravel drives and irregular surfaces.
  • Skid shoes can be adjusted by loosening the mounting bolts and positioning them to suit the operating conditions:
  • Securely held in place by three bolts
  • Can be adjusted for rough or smooth surface conditions
Rear ballast: Two 42-lb Quik-Tatch weights are recommended for additional traction.
Rear weight bracket kit is required for rear weight use.  
Tire chains are recommended for traction. 
Optional drift knives are available for each side of the blower housing and are recommended for deep-snow conditions. 
Optional heavy-duty skid shoes are available for high-hour use and additional protection. 
Optional plastic skid shoes are available to reduce scratching and marring of the driveway surface.

Replaces 700AM and 700BM

Factory item - please allow a minimum of 4 days for shipping

Features

  • California use info:

    ⚠ Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

You May Also Like

John Deere Electric Lift Kit for 100/S240 Series with 700AM Snow Blower - LP68150
John Deere Electric Lift Kit for 100/S240 Series with 700AM Snow Blower - LP68150
(13)
$699.99
Usually available
Add to Cart
John Deere Left Hand Heavy-Duty Skid Shoe - AM122263
John Deere Left Hand Heavy-Duty Skid Shoe - AM122263
(2)
$91.35
Usually available
Add to Cart
John Deere Right Hand Heavy-Duty Skid Shoe - AM122264
John Deere Right Hand Heavy-Duty Skid Shoe - AM122264
(5)
$91.35
Usually available
Add to Cart
John Deere Plastic Skid Shoe - M157831
John Deere Plastic Skid Shoe - M157831
(5)
$48.95
Usually available
Add to Cart
John Deere Drift Knife - M88984
John Deere Drift Knife - M88984
(5)
$48.87
Usually available
Add to Cart

Recently Viewed Items

TOP
0 Items
UA-604274-5