John Deere Hy-Gard Transmission and Hydraulic Oil - 2.5-Gallons - TY22062

Part Number: TY22062
0 Review(s)
John Deere Hy-Gard Transmission and Hydraulic Oil - 2.5-Gallons - TY22062
John Deere Hy-Gard Transmission and Hydraulic Oil - 2.5-Gallons - TY22062
Write a Review
Your Price: $62.61
John Deere Hy-Gard Transmission and Hydraulic Oil - 2.5-Gallons - TY22062
Usually available
Brand John Deere

Description

John Deere Hy-Gard Transmission and Hydraulic Oil

An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
 
2-1/2 gallon jug 
 
Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines. Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades. Hy-Gard may be used in many applications specifying either of these grades.
 
Applications:
  • The exclusive Hy-Gard formula was designed for use in John Deere equipment; however, it can also be used in many non-John Deere transmission and hydraulic systems

Features and Bennefits:

  • Performance-tested both in lab and in field, and approved by John Deere engineers to meet increased demands for performance and protection of transmissions and hydraulic oils
  • A polymeric viscosity improver helps Hy-Gard retain its proper viscosity over a wide range of operating temperatures. For Hy-Gard to work efficiently, it must flow readily through any part of the system. Oil that is too light can cause increased wear; too heavy will cause sluggish operation and lower mechanical efficiency.
  • Reduces wet-brake chatter, assures high braking capacity
  • Superior wet-clutch performance smoothes clutch operation
  • High tolerance to water contamination without sludge formation, which could cause filter clogging and hydraulic system malfunction –anti-oxidation capability allows oil to work properly at high temperatures, helping keep transmissions and hydraulic system moving parts clean
  • Provides protection against rust and corrosion, particularly during low-use periods
  • Anti-wear additives keep gear and bearing wear to a minimum – extreme pressure film in Hy-Gard helps prevent metal-to-metal contact
  •  Hy-Gard oil can be used in most applications calling for 10W-30 or 5W-30 engine oil for transmission and hydraulic oils. Note: Hy-Gard should be used in all applications calling for JDM J20C

For MSDS information click here

Features

  • California use info:

    ⚠ Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

You May Also Like

Recently Viewed Items

TOP
0 Items
UA-604274-5