John Deere Single Point Hydraulic Connector Kit - BXX10283

Support bracket is very sturdy (heavy). New 'single-wide' design is perfect fit for the narrow space between the loader mast and tractor. Handle and release fit my hand nicely allowing easy one handed removal. Allows removal and re-attachment of 120R loader without leaving the tractor seat. Requires slight hose modification to fit H120 loader. The hard-lines connecting to the loader on the 120R are 90 degree angled. On the H120, those same lines are straight. One might be able to make the hoses fit. Not sure about that. If you have the Deere 3rd function kit, you must still connect those hoses separately. If you have the Artillian diverter kit, you may have some space issues. The single point and support bracket occupy the same area as the artillian diverter. With creativity, I'm sure you can make it work.

Just wanted to let everyone know what we found out about this single point connection. I have a 2016 1025R with the H120 loader. My friend Doug has a 2015 1025R with the H 120 loader. all that is needed to make this work on the H120 loader is four angle fittings. The 120R loader has angle fittings on the end of the hard lines. The H120 loader has straight hard lines. Put the angle fittings on the straight hard lines and it works fine, everything else is the same. Installation was fairly easy and it works so great. Also Dougs tractor has Mauser cab on it and everything fits fine. Doug found the fittings on line at Hydraulics Direct .the part description is FS6500-06-06-90° Elbow3/8" ORFS Male x 3/8"ORFS Female Swivel. Hope this helps anyone who was wondering what the difference was. This is a great addition to our tractors.

This is one of the best purchases I’ve made for my tractor. This has made installing and removing the loader much quicker and A LOT easier for the family.

This is a well made quality kit. My only problem was with the three bolts that hold the bracket due to not much clearance. Once I got them torqued to specifications everything went smoothly. I'm really satisfied with the kit and the price. John

Just wondered if anyone out there has figured out if this will somehow work on the H120loader. It looks like all that is needed is different fittings, but i dont know. Thanks for any help Bruce

This product is easily the single best upgrade for the 1025R with the 120R loader. If you use a mower deck or a 3-point hitch carryall frequently and don't want the extra weight and bulk of the loader up front, you can now switch out the loader effortlessly. And quickly too. Removing the loader for tractor maintenance, cleaning, or storage in my tiny tractor barn is easier too. No more fighting with hydraulic pressure, or tight fitting connectors, or fluid dripping everywhere, or wearing nitrile gloves to keep the fluid off of your hands, or cleaning up spills. I have used this quick connector for four months now - works great! Worth every penny.